0.2ltr (200mL) PVC / 1/2″ NPT Sealed (scale 1mL) Calibration Vessel (Griffco)

  • Calibration Vessel
  • 0.2L, PVC
  • 1/2″ connections
  • For 12 ph dosing pump

Griffco calibration cylinders are designed to enhance the performance of chemical feed systems by providing a verification of the flow rate of the chemical feed pump. Robust construction of clear PVC with an easy to read graduation in mls and gph. Available in three models: EZ-Clean, Vented, and Open Top; and 13 sizes; 100 mL through 20,000 mL as detailed here.

Operation: Fill the cylinder to the top mark then close the valve from the chemical tank. Switch on the chemical feed pump and draw down the chemical in the cylinder for 30 seconds. Switch the pump off. The reading on the right side of the cylinder is a direct readout of USgph.

Alternatively, observe the volume withdrawn on the ml scale. To convert to LPH use this formula:

LPH = (volume ÷ draw time) x 3.6

Griffco calibration cylinders are installed in the suction line to the chemical metering pump. Two isolating valves, (not supplied) must be installed in the suction line as per the drawing below. The top of the cylinder should be vented back to the storage tank or to drain.

Note: Maximum cylinder pressure is 1 Bar

Sealed: Top is glued to cylinder and contains a vent or overflow connection. (ISO). Used in applications where there is a positive suction head and a permanent installation is desired.

Additional information

Weight1 kg




Dynamic Visibility - Custom Condition: syntax error, unexpected '}', expecting ';'

Give WES A Call

General Enquiries

We use cookies to ensure that we give you the best experience on our website. By clicking Accept, you consent to store on your device all technologies described in our Privacy Policy.

Les Bunce

Hire Business Manager

Les Bunce is Hire Business Manager. He leads the WES Hire Business responsible for managing the supply of our Temporary Chemical Dosing hire fleet on both a planned and emergency basis. Les has over 25 years’ experience in the hire industry and fully understands our customers’ hire requirements.

Patrick Fisher

Projects Director

Patrick Fisher is Projects Director. He leads the business stream responsible for project management, design, engineering, manufacture and delivery of “Capital project” chemical dosing systems. A degree qualified engineer with over 10 years’ experience working in fluid delivery solutions to the water, general industrial, petrochemical, and food & beverage industries.

Bob Cook

Senior Proposals Manager

Bob Cook is Senior Proposals Manager. After completing a traditional engineering apprenticeship at the Royal Aircraft Establishment, Bob was one of the original partners who started the business in 1986. Bob now applies his considerable experience to developing proposals & solutions to meet customer requirements, as well as providing technical support & passing on knowledge & expertise to colleagues across the wider WES business.

Ian Price

Dosing Products Business Manager

Ian Price is WES Dosing Products Business Manager, leading the business stream responsible for delivering a wide range of standardised chemical dosing packages, ad-hoc dosing needs and ‘off the shelf’ dosing products & solutions. A mechanical engineer with over 20 years’ experience in fluid handling solutions into the water, petrochemical, pharmaceutical and food & beverage markets.

Jamie Cole

Operations Director

Jamie Cole is Operations Director. Jamie joined the business in 2018 bringing career long experience in a variety of operational roles – including service delivery to the property and utilities sectors. Jamie is responsible for the management of all operational activities of the business including the repair, maintenance & refurbishment business stream, and our site installation and workshop manufacturing teams. Jamie also forms part of the senior management team of WES.

Graham Ward

Business Development Director

Graham Ward is Sales and Marketing Director. His extensive experience includes a number of senior roles working for various SMEs and large organisations in the water, power generation, petrochemical, marine and food & beverage industries. As a qualified marine engineer, Graham has established his career in Sales and Business Development and is responsible for the business development, marketing and sales of systems, products and services across WES.

Carl Millington

Non-Exec Director

Carl joined WES as Non-Exec chairman following an appointment via the Business Growth Service to assist the business with growth strategy. A highly experienced Business Mentor, Coach, Managing Director & Non-Exec Chairman, having led product, manufacturing, contracting and service provider businesses for nearly 30 years. A strong track record of market, sales and profit growth within a diverse range of sectors.

Core competencies include business growth strategies, board & business leadership, strategic planning, sales & marketing management, P&L & balance sheet management, acquisitions, divestments, outsourcing, TUPE transfer, mentoring & coaching.

Kevin Wheeler

Managing Director

Kevin Wheeler is Managing Director. Kevin trained as an Engineer at the Royal Aircraft Establishment and joined the business in 1989. Kevin now leads the Board of Directors setting strategy and defining priorities to meet the business objectives & growth aspirations whilst adding experience to technical issues where required.